Hot Tapping and Line Stopping Services in Saudi Arabia
We make branch connections and line stops on pressurized pipelines while they stay in service, for industrial plants, utilities and critical facilities across the Kingdom.
Request proposal WhatsApp +966 57 048 3020
Hot tapping is the method of making a new branch connection on a pipe while it remains pressurized and in service: a fitting and valve are attached to the line, a tapping machine cuts through the wall inside a sealed chamber, and the machine is withdrawn behind the closed valve. Line stopping uses a similar fitting to insert a temporary plug that isolates a section, usually with a bypass keeping flow alive. White Arch delivers hot tapping and line stopping in Saudi Arabia from Dammam as a hot tap branch connection contractor in Saudi Arabia, with emergency mobilization Kingdom-wide.
Live connections without shutdown
Hot tapping services in Saudi Arabia are used wherever a shutdown costs more than the connection itself: a process unit that cannot be depressurized, a fire water ring main that must stay live, or a chilled-water header serving a building that never closes. We provide hot tapping services across Saudi Arabia for steel water, fire and utility lines, adding branch connections, instrument points and bypasses without draining the system or stopping production. Each tap is engineered from measured data, because the pipe stays under pressure throughout.
Demand for hot tapping services in Saudi Arabia is concentrated in Jubail and the industrial corridor of the Eastern Province, where petrochemical complexes, utilities and process plants schedule shutdowns years ahead and new tie-ins cannot wait for the next turnaround. As a hot tapping company in Dammam close to that corridor, we pair our hot tapping services in Saudi Arabia with line stopping, so a section can be isolated, modified and returned to service while the rest of the network keeps running. Operators can review the wider scope on our solutions page.
How a hot tap is made
A hot tap has five working parts. The fitting is either a reinforced branch welded onto steel pipe under a procedure qualified for in-service welding, or a bolted split sleeve where welding is not appropriate. A full-bore valve, typically a gate or ball valve, is mounted on the fitting. The tapping machine bolts to the valve and carries a cutter with a central pilot drill. The pilot drill cuts first and holds the cut disc of pipe wall, called the coupon, so it is retrieved rather than lost into the line. Finally, the machine is retracted, the valve is closed, and the machine is removed, leaving a live branch ready for connection. On water mains the same operation is often called wet tapping or pressure tapping, and "hot" refers to the hot work used on steel pipe.
| Component | Function | What is verified |
|---|---|---|
| Branch fitting or split sleeve | Creates the new connection and reinforces the opening | Wall thickness at the location, weld procedure, sleeve rating |
| Tapping valve | Seals the branch once the cut is complete | Pressure rating, full bore for the cutter, seat tightness |
| Tapping machine | Drives the cutter through the wall inside a sealed chamber | Rating for line pressure and temperature, stroke length |
| Cutter and pilot drill | Cuts the opening and retains the coupon | Cutter size matched to the branch, coupon retention |
| Pressure test of the assembly | Proves the fitting and valve before cutting | Test pressure and hold per the approved procedure |
Hot tapping and line stopping in Saudi Arabia
Hot tapping and line stopping in Saudi Arabia are often specified together. A line stop starts as a larger hot tap: instead of leaving a branch, a stopping head or plug is inserted through the valve into the bore to block flow, creating a temporary isolation point where none existed. Where the downstream users must stay in service, two smaller hot taps are made either side and connected with a temporary bypass, so flow continues around the stopped section while a valve is replaced or the line is rerouted. When the work is complete, the plug is withdrawn, a completion plug seals the fitting, and the line returns to normal operation. In Dammam both operations are offered as live line tapping services in Dammam under one contract.
Hot tapping is one of several ways to isolate or modify a live line, and we choose the method that fits the line. The table compares them, and our pipe freezing services in Saudi Arabia cover water-filled lines where flow can be stopped locally.
| Method | What it does | Typical fit |
|---|---|---|
| Hot tap | Adds a branch to a live, pressurized line | New connections, instrument points, bypasses and tie-ins |
| Line stop | Plugs the bore through a hot-tapped fitting, usually with a bypass | Replacing a valve or section where no isolation point exists |
| Pipe freezing | Forms an ice plug with liquid nitrogen | Water-filled lines where flow can be stopped at the freeze point |
| Drain-down | Closes existing valves and drains the section | Planned shutdowns where the system can be taken offline |
Where hot tapping is used
Process plant tie-ins
As a hot tapping contractor in Jubail, we make new utility, cooling water or fire water connections at plants in Jubail and the Eastern Province without waiting for a turnaround.
Fire water ring mains
Branches and hydrant connections added to live fire mains so fire protection coverage is maintained during the work, under the building's or plant's impairment procedure.
Chilled water headers
Connections for new air handling units, fit-outs or plant extensions on the chilled-water mains of hospitals, data centers and towers.
Valve insertion and line stops
Temporary isolation of a section to replace a failed valve where the network has no other isolation point.
Instrument and sampling points
Small-bore taps for pressure, temperature and flow instruments, drains and vents on operating lines.
Emergency response
Rapid bypass or isolation when a damaged section must be taken out of service without shutting down the whole system.
As a hot tapping company in Dammam, we also tie new equipment into chilled-water mains, and our live line tapping services in Dammam for those headers sit within our HVAC services, and the plant behind them is described on our chiller installation and replacement page. Our markets page lists the sectors we serve.
Engineering checks before any tap
Every hot tap starts with a technical survey and material verification. Industry references set the framework. API RP 2201 covers safe hot tapping practices in the petroleum and petrochemical industries, including conditions that need special review or where hot tapping should not be attempted. ASME B31.3 (process piping) and ASME B31.1 (power piping) govern the design, welding and testing of the new branch depending on the system, and API 1104 Appendix B addresses welding onto in-service pipelines. These are industry references, and the applicable code for each job is set by the owner's specification.
| Parameter | Why it matters |
|---|---|
| Wall thickness and condition | Measured ultrasonically at the tap location, because thin or corroded wall changes the fitting design or rules the location out |
| Operating pressure and temperature | Sets the rating of the fitting, valve and machine, and limits for in-service welding |
| Flow rate | Flow cools the weld zone quickly, which affects weld quality and must be accounted for in the procedure |
| Medium | Water and inert services are routine, while flammable, toxic or reactive contents need special review under owner and industry guidance |
| Pipe material | Carbon steel, stainless steel, ductile iron and other materials need different fittings and procedures |
| Location | Clear of existing welds, flanges and fittings, with access for the machine and its stroke |
Welding onto a live line carries two main risks, burn-through and hydrogen cracking, and both are managed by procedure (TWI). The figures below are the commonly cited anchors.
| Risk | Published anchor | How we manage it |
|---|---|---|
| Burn-through | API 1104 Appendix B notes that burn-through is unlikely at 6.4 mm (0.25 in) wall or more when low-hydrogen electrodes and normal practice are used | Measure wall thickness first, limit heat input, and use qualified procedures and electrodes |
| Overheating of the contents | API RP 577 recommends a minimum flow of about 1.3 ft/s (0.4 m/s) in liquid or gas being hot tapped | Keep flow in the range set by the procedure (E2G hot tap guidance) |
| Hydrogen cracking | Needs stress, hydrogen and a susceptible microstructure together, and flow-cooled welds cool faster, so very high flow raises the risk | Low-hydrogen electrodes, controlled cooling and inspection after the weld has cooled |
The tapping valve, fitting and machine must each be rated for the line. For flanged assemblies, ASME B16.5 sets pressure classes, and the ratings below apply at ambient temperature for carbon steel group 1.1 material; they fall as temperature rises.
| ASME B16.5 class | Rating at ambient temperature | In bar |
|---|---|---|
| Class 150 | 285 psi | 19.6 bar |
| Class 300 | 740 psi | 51.0 bar |
| Class 600 | 1,480 psi | 102.0 bar |
| Class 900 | 2,220 psi | 153.1 bar |
Hot tapping company in Dammam, with Jubail and the Eastern Province
As a hot tapping company in Dammam, we cover the Eastern Province first, and the industrial corridor to the north sets much of the demand. We also offer live line tapping services in Dammam itself, where hospitals, towers and the Second Industrial City run water, fire and chilled-water networks that cannot easily be shut down.
Hot tapping contractor in Jubail
Work as a hot tapping contractor in Jubail follows from the scale of the city. Jubail Industrial City was established in 1975 under the Royal Commission for Jubail and Yanbu, and it houses thirteen of SABIC's sixteen production plants in the Kingdom as well as the King Fahd Industrial Port (Saudipedia, Jubail Industrial City). Plants of that kind run cooling water, utility water and fire water networks that are expensive to drain, so a hot tapping contractor in Jubail is often asked for new tie-ins between turnarounds. We do not name the plants we serve, and we work under each site's permit-to-work system.
| Location | What the published sources say | What it means for hot tapping |
|---|---|---|
| Jubail Industrial City | Established 1975, with the Royal Commission created by Royal Decree on 21 September 1975 (Saudipedia, Royal Commission for Jubail and Yanbu). The Commission has allocated SAR 67.5 billion to double the city's area by 2030 (Saudipedia, Jubail Industrial City) | Continuous plant and utility expansion creates tie-ins that cannot wait for a turnaround, so a hot tapping contractor in Jubail is regularly needed |
| Royal Commission cities | Four industrial cities with a combined area exceeding 2,175 km² (Saudi Post) | A large, expanding stock of live utility networks |
| Dammam | The Second Industrial City was established by MODON in 1978 on 25.5 million square meters (MODON) | Our headquarters; live line tapping services in Dammam are mobilized from here. See our HVAC contractor in Dammam and MEP contractor in Dammam pages |
| Al Khobar, Dhahran and Ras Tanura | Eastern Province commercial and industrial sites | Reached quickly from Dammam |
| Riyadh and Jeddah | Commercial, institutional and industrial sites | Mobilized from Dammam. See our HVAC contractor in Riyadh and MEP contractor in Riyadh pages |
Method and permits
Every tap runs under a written method statement. The sequence below is the outline we follow for hot tapping services in Saudi Arabia, and a hot tap branch connection contractor in Saudi Arabia, or a hot tapping contractor in Jubail plant, works to the same outline. The detail is agreed with the owner before work starts. Fire line work follows the site's impairment procedure, and our standards page describes the quality and safety framework.
Survey and data
Confirm pipe material, size, measured wall thickness, pressure, temperature, flow and medium, and select the tap location.
Design and method statement
Select fitting, valve and machine, prepare the method statement, risk assessment and contingency plan, and submit for approval.
Permits and isolation planning
Obtain hot work and line-breaking permits under the site permit-to-work system, with gas testing where the owner requires it.
Install the fitting
Weld the branch under a qualified in-service procedure or bolt on the split sleeve, followed by the required inspection.
Test the assembly
Pressure test the fitting and valve before any cutting begins.
Cut the tap
Mount the machine, cut the opening, retract the cutter and coupon, close the valve and remove the machine.
Connect and hand over
Connect the branch, test, reinstate coatings or insulation and hand over records, including the retrieved coupon where the owner requests it.
Hot tap branch connection contractor in Saudi Arabia: emergency mobilization
Plant failures do not follow shutdown calendars. As a hot tapping company in Dammam, we run critical response with Kingdom-wide mobilization, reaching Jubail, Ras Tanura, Al Khobar and Dhahran quickly and traveling to Riyadh, Jeddah and remote project sites as required. For a hot tap branch connection contractor in Saudi Arabia that operators can call at short notice, the limiting factor is usually data, so sharing the items below at first contact shortens the time to a safe method statement. The same team also delivers the mechanical, piping and electrical and MEP scope around the tie-in.
| Send at first contact | Why we ask |
|---|---|
| Pipe size and wall thickness readings | Decide whether a tap is possible and select the fitting |
| Pipe material and grade | Sets the welding procedure or sleeve choice |
| Operating pressure and temperature | Sets the rating of the fitting, valve and machine |
| Medium and whether flow can be adjusted | Decides the hot work controls and the flow range for welding |
| Location, access and site permit rules | Lets us plan mobilization, equipment and approvals |
| Drawings, P&IDs or photographs | Speeds up the survey and the method statement |
Why clients choose White Arch
As a hot tapping company in Dammam with ISO-certified management systems, we are one accountable contractor for mechanical, electrical and specialist scopes, with submittals, QA/QC and documented handover. Learn more about White Arch, browse our services or read our technical articles.
Frequently asked questions
What is hot tapping?
Hot tapping is making a new branch connection on a pipe while it stays pressurized and in service, using a welded or bolted fitting, a valve and a tapping machine that cuts the wall inside a sealed chamber.
What is the difference between hot tapping and line stopping?
Hot tapping creates a new live connection, while line stopping uses a hot-tapped fitting to insert a temporary plug that isolates a section of pipe, often with a bypass to keep flow moving.
Does White Arch offer hot tapping and line stopping in Saudi Arabia?
Yes. White Arch delivers hot tapping and line stopping in Saudi Arabia from its Dammam base, so a section can be isolated, modified and returned to service while the rest of the network keeps running.
Which standards apply to hot tapping in Saudi Arabia?
API RP 2201 is the common industry reference for safe hot tapping practice, with ASME B31.3 or B31.1 for branch design and testing and API 1104 Appendix B for in-service pipeline welding, while the owner's specification sets the code that applies on each project.
Can hot tapping be done on any pipe?
No, each line is assessed for wall thickness, material, pressure, temperature, flow and medium, and some services or locations are unsuitable or need special review before a tap is approved.
What wall thickness is needed for hot tapping?
API 1104 Appendix B notes that burn-through is unlikely at 6.4 mm (0.25 in) or more with low-hydrogen electrodes. Thinner wall needs special assessment, so wall thickness is measured at the tap location before any tap is approved.
Is White Arch a hot tapping company in Dammam?
Yes. White Arch is a hot tapping company in Dammam, headquartered there, and mobilizes from the city across the Eastern Province and the Kingdom.
Is White Arch a hot tapping contractor in Jubail?
Yes. White Arch works as a hot tapping contractor in Jubail, mobilizing from Dammam to petrochemical, utility and industrial sites and working under each site's permit-to-work system.
Does White Arch offer live line tapping services in Dammam?
Yes. White Arch offers live line tapping services in Dammam and the wider Eastern Province, making branch connections on pressurized lines that stay in service.
How quickly can a hot tap branch connection contractor in Saudi Arabia mobilize for an emergency?
Mobilization depends on location and data availability. As a hot tap branch connection contractor in Saudi Arabia, White Arch asks for pipe size, material, pressure, temperature and medium at first contact so that the survey and method statement can start immediately.
Need a live connection without a shutdown?
Send us your scope, drawings or site details. We will review them and respond with a coordinated proposal.
Request proposal WhatsApp +966 57 048 3020Email info@whitearch.sa
